Sign up for our Newsletter

Sign up for our Newsletter:
Receive information about new products and promotions !

Enter code:
Captcha

I have read and accept the Terms and Privacy Policy.

I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here


zapisz się

Our sites (ticks and movies)

Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets

  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets
  • Multitrans - transfer paper for white toner and CMYK printes to hard surfaces - 10 sheets

Brand: FOREVER

Basic weight: 140 g/m2

Dimension: A4

Quantity in package: 10

Stock code: 6PL3000F4A410

  • Attention! Fields marked with an asterisk (*) are required

    * I have read and accept the Terms and Privacy Policy.

    I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

DELIVERY COST

Delivery cost depends on the destination and it is individually calculated. You will be informed about this cost in order confirmation.

If you need this information earlier, contact our Sales Department please.

All information about cost are available here

5,08 € gross

/ 4,13 € net

(Price per piece: 0,41 € net)

To recommend a product, you must be logged in

Please inform me about price decrease of this product.

  • * I have read and accept the Terms and Privacy Policy.

    * I agree to receive marketing information (Newsletter) to my mailbox. I can unsubscribe from the Newsletter at any time here

Multitrans - transfer paper
  • Transfer paper for printing onto hard surfaces
  • Weight: 140 g/m2
  • Paper without background
  • The transfer paper is compatible with most CMYK and CMYW (white toner) laser printers and copiers available on the market
  • Paper for heattransfer is suitable for all hard, light surfaces: wood, metals, ceramics, stones, leather, acrylic, mirrors, nylon, chromolux and others
  • Multi-Trans transfer paper for lasers printer is recommended for printing any graphics and photos - even with small details, white elements and tonal transitions, on items such as: mugs, plates, beer glasses, mats, plates, pens, plates CD
  • Thermal transfer paper for prints on wood, metal, cups or puzzles guarantees excellent image resolution and saturated colors
  • Paper for cups, metals and wood allows for easy marking and production of gadgets: all you need is a laser printer, the selected base and heat press
  • You will need a special silicone pad , which ensures perfect adhesion of the transfer paper to the substrate
Application instruction:

MULTI-TRANS FOR MUGS:

PRINT SETTINGS FOR OKI WHITE TONER PRINTERS:
  • Paper & Print: Transparency, Multi-Purpose Tray
  • White Toner Density: +3 (Calibration at the printer panel)
  • Image Mode: mirror image
PRINT SETTINGS FOR OKI Pro8432WT:
  • Paper & Print: User Type 1, Multi-Purpose Tray
  • White Toner Density: +3 (Calibration at the printer panel)
  • Color Paper Settings: +2 (Set at the printer panel)
PRINT SETTINGS FOR CMYK PRINTERS - Only for light colored mugs:
  • Paper & Print: Transparency (Film/Foil) or similar
TRANSFER PROCESS:
  • Preheat your mug press before use
  • Position & fix the printed image to the mug using a heat resistant tape.
  • Put the mug in the press.
  • Press by using the settings below.
  • IMPORTANT: The timer of the mug press should not start until the mug has reached the set temperature. If your press does not do this automatically, increase the press time to 4 minutes!
  • Cool the mug down by dipping into cold water. Make sure the transfer media is soft before peeling.
  • ATTENTION: At this point, the mug is very hot. Take precautions when moving the mug.
SETTINGS MUG PRESS:
  • WHITE & COLORED MUGS 140°C / 284°F • 180 sec • high pressure
TIPS & TRICKS:
  • The light marks that may appear after the application process, can be easily removed with Isopropanol.
  • Using the Mug Press Silicone Pad helps distribute the heat evenly around the whole mug & transfer. The pressing parameters can vary by using a silicone pad.
  • If you put the mug in the oven at 160°C / 320°F for 15 minutes the scratch resistance will be better.
Before starting a mass production, we recommend to make transfer and washing test with all materials.

MULTI-TRANS FOR HARD SURFACES:

PRINT SETTINGS FOR OKI WHITE TONER PRINTERS:
  • Paper & Print: Transparency, Multi-Purpose Tray
  • White Toner Density: +3 (Calibration at the printer panel)
  • Image Mode: mirror image
PRINT SETTINGS FOR OKI Pro8432WT:
  • Paper & Print: User Type 1, Multi-Purpose Tray
  • White Toner Density: +3 (Calibration at the printer panel)
  • Color Paper Settings: +2 (Set at the printer panel)
PRINT SETTINGS FOR CMYK PRINTERS - Only for light colored mugs:
  • Paper & Print: Transparency (Film/Foil) or similar
TRANSFER PROCESS:
  • Set the temperature of the transfer press to 200°C / 390°F.
  • Place the substrate on the lower plate.
  • Place the transfer paper on the substrate and cover both with the a silicone pad with 5mm thickness.
  • Place the sensor of the digital thermometer between the transfer paper and the substrate. (Relevant is the temperature on the surface of the substrate which is shown through the digital thermometer. The printing time depends on the size (mass) of the substrate.)
  • Open the transfer press when the below mentioned temperature is achieved and peel off the transfer paper as indicated below.
  • ATTENTION: At this point, the material is very hot. Take precautions when moving it.
SETTINGS HEAT PRESS ON DIFFERENT SURFACES:
  • Aluminium: 4-5 bar (55-70 psi), opening at 120°c (250°f), peeling: warm or cold, fixing: 60 sec.
  • Adhesive film: 4-5 bar (55-70 psi), opening at 130°c (265°f), peeling: let cool down for 5-10 sec.
  • Chromolux binder: 3-4 bar (40-60 psi), preheating: 10 seconds, opening at: 100-110°c (210-230°f), peeling: warm or cold
  • Ceramic tile: 4-5 bar (55-70 psi), opening at: 130°c (265°f), peeling: warm or cold, fixing: 60 sec
  • Wood: 3 bar (40 psi), preheating: 20 seconds, opening at: 130°c (266°f), peeling: immediately, fixing: 60 sec.
  • Magnetic vinyl: 4-5 bar (55-70 psi), opening at: 110-120°c (230-250°f), peeling: warm or cold, fixing: 60 sec.
  • Acrylic glass: 4-5 bar (55-70 psi), opening at: 100-105°c (210-220°f), peeling: let cool down for 5-10 sec.
  • Mirror: 4-5 bar (55-70 psi), opening at: 145°c (265°f), peeling: warm or cold
  • Mouse pad: 4-5 bar (55-70 psi), opening at: 110°c (230°f), peeling: warm or cold
Before starting a mass production, we recommend to make transfer and washing test with all materials.