Subli Glaze UV Protection Coating with a capacity of 400 ml
You can use Subli GlazeUV Protection Coating to:
- Subli Glaze UV Protection spray is design to be sprayed over any type of digital printed image to increase resistance against UV Fade.
- It can be applied at the end of the sublimation process (after the image has been transferred), to add a layer of protection against ultra violet radiation. Exposure to ultra violet light (i.e. Sunlight) can over time cause image fade; Subli Glaze UV Protection Coating reduces the effects of UV image fade.
- Laminate is suitable for prints placed on various substrates: PVC, metals, glass, ceramics, stone, wood
How to use:
- Shake the can well for 1 minute
- Ensure the surface to be coated is clean, dry, and free from grease
- Work at room temperature and in a ventilated room
- Apply Subli Glaze UV Protection Coating smoothly and evenly, holding the can approx. 250mm from surface using light passes at room temperature
- Air Dry for 24 hours. The substrate is touch dry in approx. 1 hour, and fully cured in 24 hours
Important:
Shipping outside the European Union may involve additional formalities and higher transport costs. The goods are unsuitable for air transport.