Lexmark Lexmark 100XL / 105XL [14N1068E / 14N0822E] inkjet cartridge
Inkjet cartridge MAXJET brand is an alternative to original product Lexmark 14N1068E / 14N0822E (No. 100XL / 105XL).
MAXJET inkjet cartridge:
- compatible with OEM
- ready to use immediately
Lexmark 100XL product instruction manual
1. Pull of the yellow label from top side before installation.
2. Remove the protective cap from the bottom gently.
3. Install the replacement cartridges inside the printer. If the printer displays info like: Preparing Printer..., please wait for about 30 seconds till the printer gets ready for printing.
For the purpose of protecting your printer, we suggest that you perform the nozzle check once the new cartridge(s) has (have) been replaced. If broken lines appear, perform nozzle cleaning till it gets normal.
Please neglect any printer update prompts in order to enable the cartridge to remain workable.
4. If the printer displays info like Printer will not print until the this Cartridge is replaced. A variable amount of ink will remain in the cartridge., please follow the instruction below.
If the cartridge can not be recognized:
1. Please take the used cartridge(s) out of the printer.
2. Cut off the small contact in the middle of the rectangular grove.
3. View how it looks like exactly.
4. Reinstall the cartridge(s) following the normal printer procedure.
Ignore prompts to update firmware/software to ensure these cartridges are not rejected by your printer.