DM3 35 cm DTF printer for direct printing - starter kit
The InkONE DM3 printer starter kit includes:
- InkONE DM34 DTF printer with dual Epson i1600 head
- Dryer and Shaker InkOne SM3
- DTF inks - 5 bottles per 1000 ml (the set contains one bottle of cyan, magenta, yellow, black and white inks)
- DTF film in roll 35 cm x 50 m
- DTF hot melt powder- 1 kg
- RIP software
- Network cable
- 220V 16A power cable, 3 meters long
- Accessories: syringe, ink supply tubes, a set of dampers, gummed tape, residual ink bottle, residual ink tank
DTF Printer InkOne DM3 PRINTER TECHNICAL SPECIFICATIONS
- Printer dimensions: 840 x 1100 x 950 mm
- Printer dimensions package: 860 x 570 x 380 mm
- Printer weight: 30 kg
- Printer weight package: 40 kg
- Interface: Ethernet Gigabyte
- Colours: CMYK+W
- Ink consumption: 10ml/m2
- Ink technology: water-based pigment ink
- Ink Supply: Ink Tank System
- Circulating System: the ink recirculation system, white ink stirrer, and additional filtering in the dampers prevent sediment formation and blockages
- Print head technology: Epson XP600
- Printing speed: up to up to 8 pass 5 ML/h (meters linear per hour)
- Compact and optimized design: fits in all workspaces and provides easy access to the interior for simplified repair and maintenance
- Top window and interior light: allows real-time verification of print quality
- Built-in vacuum platform: the film is absorbed flat, maintaining height during printing
- Heated flat output tray: prevents contact with the print head and improves ink fixation, avoiding unwanted dispersions or mixtures
- Manual Cutter: includes a cutter that ensures a straight edge from start to finish
- Integrated digital display allows for easy monitoring of multiple parameters
- Warranty: 12 months (except for parts that carry ink, such as the print head, capping, wiper, damper, or the hose system). The print head is a consumable and is not covered by warranty.
The DTF printer should be placed in a place where the temperature is between 18°C and 28°C and humidity is between 45% and 60%.
DTF Dryer and Shaker InkOne SM3 TECHNICAL SPECIFICATIONS
- Dryer dimensions: 620 x 870 x 950 mm
- Dryer dimensions package: 820 x 630 x 760 mm
- Printer weight: 45 kg
- Printer weight package: 58 kg
- Maximum paper/film width: 35 cm
- Rated voltage: 220V
- Precise digital control: regulates the oven temperature, powder application, and shaking speed
- Upper compartment for powder: allows for easy and safe powder application
- Removable drawer for excess powder: enables recycling of the surplus and keeps the workspace clean
- Automatic film collection system: features cooling fans and automatic reel collection for neat film rolling
- Hepa and Carbon Filters: remove gases and dust from the oven, ensuring a safe working environment
- Disposable filters: require no cleaning; once saturated, they are simply replaced
- Ventilation system
- Paper feed device
- 2 Lamps
- Dust blocker
- 2 Aluminum rods (59 cm)
- Power cable
- Paper tube (38 cm)
- Screws and hex key for assembly
Perfect for large-scale transfer production: this system replaces the DTF drying oven and polyamide powder applicator. The transfers are ready to cut and press, or they can be stored in roll form. Automates the curing process, improving efficiency. Reduces material waste. Saves time and money.